UT 110

Crawler multipurpose operating machine UT110

Crawler multipurpose operating machine UT110

UT 110 is the new crawler operating machine specialized for vineyards. The strength of the components, the very low centre of gravity, the traction force, the great manoeuvrability and the cab comfort make the UT 110 the best solution to operate in narrow row spacing and on steep slopes.


The special design of UT 110 allows to fit directly on the chassis big implements such as sprayer, grape harvester, pruner, container for materials transport, etc. In this way these implements are directly loaded on the rubber tracks thus reducing the total length of the machine with very important benefits in stability compactness and manoeuvrability.
It is also possible to use other standard implements such as mulchers or soil working machinery fixed to the hydraulic linkage.

Grape harvester

One special implement is the integrated grape harvester, developed to mechanize the harvest in terraced or steep slope vineyards. This harvester is highly appreciated for the quality of the grapes, which result clean, without any leaves or damages to the berries.

The stainless steel grape container, with capacity 650 litres, can be hydraulically unloaded. The total width of the machine of 1.20 m allows to harvest vineyards with minimum row spacing of 1.60 m both on terraced and steep slope vineyards, with longitudinal steepness up to 75%. The UT 110 can be equipped with an electronic control mooring winch, thus allowing to work safely also in extreme conditions of steepness, without damaging the soil.

The harvesting speed is up to 4.5 km/h with an excellent efficiency. All harvesting parameters can be adjusted and controlled by the computer in front of the driver.


UT 110 is equipped with an hydrostatic heavy duty transmission. The speed is continuously variable from 0 to 8 km/h through a joystick with electronic control and cruise control function. The rubber tracks are driven by radial piston motors giving the maximum torque immediately at the start to have the maximum traction force even on bad soil conditions.

The PTO is mechanically driven and engaged with electro-magnetic clutch. The full engine power is available through the PTO. UT 110 driving feeling is very easy. The operator controls two joysticks: one to move and steer the machine with also the possibility to counter-rotate the tracks, and one to control the linkage and the hydraulic auxiliary power supply.

The machine is provided with security negative brakes that can be activated directly by the operator and are automatically engaged when the joystick is released or when the Diesel engine is turned off. UT 110 has two separated oil tanks to avoid any contaminations: one for the transmission and one, independent, for auxiliary hydraulic services.

Mooring winch

UT 110 can be equipped with an electronic control mooring security winch with 200 m of cable, negative brakes and automatic synchronization to the speed of the machine.
The tension of the cable can be continuously adjusted by the driver through a potentiometer according to different working conditions.


The hydraulic three point linkage category I is provided with floating position and fixing hooks adjustable in width.

The lifting capacity is 900 kg. The three point linkage is equipped with pivoting front bar: the hydraulic rotation of the hook bar, in floating position, allows free movements of the implements to perfectly suit the ground contour, independently from the position of the machine.


UT 110 is provided with pressurized and sound proof cab with air filtering system, air conditioning and heating. The Grammer seat, with automatic setting of the pneumatic suspension, can be tilted to allow a comfortable driving position also in steep working conditions.
The cab is equipped with front and rear LED lights to allow night work.


Diesel engine VM-R754 IE4, 4 cylinders, turbo intercooler, common rail, displacement 3000 cc, max power 80 kW @ 2600 revs, max torque 420 Nm @ 1000 rpm. Fuel tank capacity: 65 litres.


Laser cut chassis in high strength steel AHSS (Advanced High Strength Steel), totally closed in the lower part.
Surface treatments of cataphoresis and powder painting.


The new generation reinforced rubber tracks grant high strength and low ground pressure, thanking to a contact surface bigger than 1.25 square meters.

The pivoting rollers suspensions let the rubber tracks to constantly follow the ground surface, thus allowing the best driving comfort and traction force.

Auxiliary hydraulic power supply

UT 110 is provided with 7 double effect hydraulic power take off, 2 of which with floating position, and a priority valve with oil flow regulator to operate implements requiring a continuous and variable oil flow.

The auxiliary hydraulic system can provide up to 35 litres/min of oil flow at a maximum pressure of 180 bars.


3200 [mm]
2650 [mm]
1220 [mm]
Track width
320 [mm]
2950 [kg]